8. Vector Chart Material
8-51
6. In the Load or Update Charts from CD ROM dialog box, choose the charts to load into ECDIS, and then click
the Load button to load the charts into the ECDIS. For further details, see “Interpretation of Load or Update
Charts from CD ROM” on page 8-47.
North Up TM
ECDIS only
HDG 070.0°
SPD
(CALC)
1.8 Kt
SB
(POSN)
1.7 Kt
COG
(POSN)
045.1°
SOG
(POSN)
2.0 Kt
7. Before ECDIS starts loading charts (and then automatically
converts them into SENC format) you are asked confirmation for
this operation.
8.The SENC conversion window appears.
To Next Page
Loading...
