9. Raster Chart Material
9-31
Removing ARCS chart group by “active group”
[Remove Charts]
By Group
Manual
Go Back
1. Open the Chart menu.
2. On the menu, check if the menu item Activate S57 chart appears on the first
line. If it is displayed, go to step 4.
3. If the menu item Activate ARCS chart is displayed, push the thumbwheel.
4. Choose Remove Chart from the menu and By Active Group from the sub
menu to show the ARCS Remove window.
5. Choose group from Group List and then choose the chart you want to
remove.
6. Click the Remove charts by group button. The system removes the ARCS
charts from the hard disk which pertain to the active group.
7. Click the OK button.
To Next Page
Loading...
