Furuno FEA-2107 - Choosing Pilot Data to Use in Planning Mode

16. Pilot Data
16-6
16.4 Choosing Pilot Data to use in Planning Mode
If the PilotData in the status bar is black (or white depending on color scheme) this means that the workstation is in
the monitoring mode for pilot data. To activate the planning mode and choose pilot data for the planning mode, do
the following:
North Up TM
Move cursor here and
use thumbwheel to
select desired user chart.
ECDIS only
Posn true
HDG 070.0°
SPD
(CALC)
1.8 Kt
SB
(POSN)
1.7 Kt
COG
(POSN)
045.1°
SOG
(POSN)
2.0 Kt