16. Pilot Data
16-10
16.5.4 Changing other data of pilot data record
To change function range or character data of pilot data, such as range and text, do the following:
1. Choose desired pilot data record, following paragraph 16.5.2.
2. Place the cursor in the desired edit box, spin the thumbwheel to choose desired value, and then push the
thumbwheel to confirm.
16.5.5 Deleting a pilot data record
To delete a pilot data record, do the following:
1. Open the Edit page of the Plan Pilot Data dialog box and then check Enable changes.
2. Choose desired pilot data record to delete, following paragraph 16.5.2.
3. Click the Delete button.
16.5.6 Importing pilot data from other routes
You may import pilot data records from other pilot data records as follows:
1. Open the Edit page of the Plan Pilot Data dialog box and then check Enable changes. Click the Import button
to show the following dialog box.
2. In the Pilot data field, choose the source pilot data.
3. Enter first pilot data record to copy in the First page to copy field.
4. Enter number of pilot data records to copy in the Number of pages to copy field.
5. “Copy to pilot data” shows where the pilot data record is to be copied to and “First page copied as page” shows
the number which the first record from the pilot data source will be copied into the current pilot data.
6. After confirming settings, click the Copy button to import pilot data records.
To Next Page
Loading...
