22. Radar Overlay
22-3
22.3 Choosing Source of Radar Overlay
22.3.1 Radar overlay through LAN from FAR-2x07 radars
Place the cursor on Radar in the status bar, and the Radar Selection window appears. If there is more than one Radar
video source available, you can change radar overlay source by spinning thumbwheel.
Radar overlay source indicates source radar overlay. In the example display above the source is MAST X.
22.3.2 Radar overlay through radar overlay card inside ECDIS
If there is more than one Radar video source available and connected to ECDIS, you can use external switch to
select desired source of Radar video overlay. Selected source is displayed on Radar Overlay dialog box and on
upper status bar:
To Next Page
Loading...
