Furuno FEA-2807 - How to Load ARCS Charts Manually

9. Raster Chart Material
9-19
9.9.3 How to load ARCS charts manually
You can also load ARCS charts manually into the system as follows.
[Load Charts]
By Permits
By Group
Manual
Go Back
1. Insert desired ARCS CD-ROM into the CD-ROM drive.
2. Select Load Charts from the Chart menu and Manual from the sub menu. A
Chart Operations window appears; select desired chart from the list box.
3. To load a chart into the system, click the Load Chart button.
Note: To use another CD-ROM drive connected in your network, select the desired drive from the Drive field.
D: Local CD-ROM drive
F: Other CD-ROM drive (from other ECDIS, connected via LAN)