Furuno FEA-2807 - A6.2 How to Export Routes into an Excel File

Appendix 6: How to Backup Routes
AP-90
A6.2 How to Export Routes into an Excel File
Below is an example of how to export waypoints' name and latitude/longitude values to a Microsoft Excel table.
1. Put the cursor on Route in the status bar then click the Plan button to open the Plan Route dialog box. Put the
cursor on the triangle in the dialog box, select Backup and Restore from the menu then push the scrollwheel.
2. In the Hard Disk field, select desired route then select desired Backup Format (ASCII WPT NAME POSITION).
3. Select backup drive (A:\) from the Backup Device field then insert floppy disk in the processor unit of the
ECDIS. Click the Backup button.
4. Move floppy disk to computer where you can run Notepad and MS Excel applications.
5. Open the Notepad software then open the route selected at step 2.
Content of Notepad looks something like this.
6. Copy text to the clipboard: Edit>Select All then Edit>Copy.
7. Open the MS Excel software. Open a new Excel file then copy text from the clipboard to the MS Excel:
Edit>Paste.
Content of MS Excel looks something like the one above.