Furuno FM-3000 - Page 27

18
5.DSC Operation
5.5.2 Normal call
The nature of the Distress call should be included in the Dis-
tress call.
q Push [
DSC/ENT
] to enter the DSC menu.
w Rotate [
CHANNEL
] to select “DTRS Set,” push
[
DSC/ENT
].
e Rotate [
CHANNEL
] to select the nature of the distress,
push [
DSC/ENT
].
•‘Undesignated,’ ‘Explosion,’ ‘Flooding,’ ‘Collision,’ ‘Grounding,’
‘Capsizing,’ ‘Sinking,’ ‘Adrift (Disable adrift),’ ‘Abandoning (Aban-
doning ship),’ ‘Piracy (Piracy attack)’ and ‘MOB (Man overboard)’
are available.
• The selected nature of the distress is stored for 10 minutes after
programming is finished.
Note: When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is
connected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y. (next page)
SelNature
˘Explosion
Undesign
Flooding
SelItem
POSReport
RCVCalls
˘DTRSSet
r The position information appears. Set the current posi-
tion, push [
DSC/ENT
].
• Edit the digit of your position data by using [
CHANNEL
].
-Push [
CH/WX
] or [
SCAN
] for cursor movement.
-After editing latitude data, select “N”; North latitude or “S”;
South latitude.
-After editing longitude data, select “E”; East longitude or “W”;
West longitude.
- Push [
HI/LO
] to clear the position data.
t The time information appears. Set the current UTC time,
push [
DSC/ENT
].
• Edit the digit of the current UTC time by using [
CHANNEL
].
-Push [
CH/WX
] or [
SCAN
] for cursor movement.
- Push [
HI/LO
] to clear the time data.
Inputtime
UTC:
Null˘[H/L]
InputPOS
°.
-°.
Null˘[H/L]