Furuno FM-8800D - Change the Specification Power for PR-240-CE

4.8 Change the Specification Power for PR-240-CE
4-36
4.8 Change the Specification Power for PR-240-CE
When switching the power supply, switch is made below two spots. Factory shipment is
220 VAC specification.
1. Change of wiring
2. Change of jumper
Change the jumper
Change wiring
Change the red cable with plug to the
specification power.
When changing the specification (Factory setting)
from 220 VAC to 100 VAC, move the secon
d
wiring to the first on the terminal board.
220VAC spec.
(default）
1
2
3
4
100VAC spec.
1
2
3
4
Black
Black
White
White
SEL
115V
SEL
230V
Red