5.4 Block Description
5-15
Fig. 5.4.8 V
GG
vs Output Power
TEMPERATURE DETECTION
When the temperature sensor: U13 (LM60CIM3) detects 60 degrees, it automatically
reduces TX output to 14W. This output is the value adjusted by [MENU] -> SYSTEM
-> TX POWER -> “TEMP.REDUCE”. The output voltage of this sensor is calculated by
Vo = 6.25 mv/deg. x Tc deg.
Fig. 5.4.9 TX/RX Board Temperature Sensor Location
CH16 Low Power Hi Power
Power Data 45 161
PWR CONT 0.54 V 1.93 V
F VSWR 0.65 V 3.04 V
Power 0.75 W 21.2 W
U13 (LM60CIM3)
PA
Measured
To Next Page
Loading...
