APPENDIX
AP-24
4) Removing jammed paper
a) Remove paper carefully from the paper feed slot.
b) If torn paper cannot be removed with fingers use a tweezers, being careful not to
scratch parts.
NOTE) Scratched printing head, platen or rubber roller can cause printing or
paper feed malfunction.
c) If torn paper cannot be removed, consult a FURUNO dealer for advice.
Platen
Head
Rubber roller
(one each right and left)
Retainer plate
(SUS)
5) Setting paper
Set paper as mentioned earlier.
5. Adjusting printing intensity
You can adjust the printing intensity with the control at the top of the frame.
Clockwise: Lessens intensity.
Counterclockwise: Increases intensity.
To Next Page
Loading...
