1. INITIAL SETTINGS AND ADJUSTMENTS
1-24
9. Click [Digital Output] on the menu bar.
[Channel 01-01] to [Channel 10-08] are shown on the display. Each sensor adapt-
er MC-3030D has eight input ports. When one sensor adapter MC-3030D is con-
nected to the MC-3000S, [Channel 01-01] to [Channel 01-08] can be used. When
ten sensor adapters MC-3030D are connected, [Channel 01-01] to [Channel 10-
08] can be used.
The connector no. on the MC-3030D board and the corresponding channel no.
are shown below.
No.1 sensor adapter MC-3030D
No.2 sensor adapter MC-3030D
10. Check the checkbox for [Channel No.] to set the items referring to the table shown
below.
Connector No. Channel No. Connector No. Channel No.
J3
Channel 01-01
J5
Channel 01-05
Channel 01-02 Channel 01-06
J4
Channel 01-03
J6
Channel 01-07
Channel 01-04 Channel 01-08
Connector No. Channel No. Connector No. Channel No.
J3
Channel 02-01
J5
Channel 02-05
Channel 02-02 Channel 02-06
J4
Channel 02-03
J6
Channel 02-07
Channel 02-04 Channel 02-08
To Next Page
Loading...
