9. ROUTES
9-25
9.13 Reports
This ECDIS generates reports for waypoints in the selected route. If connected to a
printer, reports can be printed by clicking the [Print Text] button. Text in reports can be
searched with the [Find] button.
To generate a report, do the following:
1. Click the [PLAN] button to go to the Voyage planning mode.
2. Click the [Report] button followed by the [Route] button. Click applicable “report”
button - [WPT], [Full WPT] or [Passage].
The following dialog box appears.
3. Select the appropriate route then click the [Open] button to show the selected re-
port. See the next several pages for examples.
177.51NM
To Next Page
Loading...
