Furuno FMD-3100 - Button Label and Equipment State

11. HOW TO MONITOR ROUTES
11-14
11.8.7 Button label and equipment state
The label on the button at the position circled in the figure below changes according
to the state of the instant track and TCS (where an EC-3000 with TCS functionality is
connected to the same network).
* Button inoperative.
Instant track
state
TCS state Button label
Creating OFF Monitoring
ON Execute (same function as Monitoring)
Monitoring OFF Stop
ON* Stop
Return to original
route after back to
track mode
OFF Reset (Instant track is deleted; another instant track
maybe created)
ON Reset