Furuno FMD-3100 - How to Display AIS Target Data

14. AIS TARGET FUNCTIONS
14-9
14.8 How to Display AIS Target Data
Standard data
Put the cursor on a desired AIS target then push the left button.
Title bar
MMSI
Bearing
Range
Course over ground
Speed over ground
CPA
TCPA *
1
Bow cross range
Bow cross time
Position
Normal/Expand
button
Heading
Navigation status*
2
Rate of turn
Scroll buttons*
3
Close button
Vessel name
NAV status: *
Underway
using
engine
(1/2)
*
1
: The range of the TCPA value depends on the input sentence.
(Blank if no sentence is received.)
TTM: -99:59 to 99:59
TTD: -81:59 to 81:59
*
2
: [Altitude] appears when the selected target is an AIS SART airfcaft.
*
3
: Scroll buttons appear only when there is more than one AIS target’s data displayed.