EasyManua.ls Logo

Furuno FMD-3100 - Page 386

Furuno FMD-3100
395 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
APPENDIX 4 ALERT LIST
AP-48
*: “Inst.” denotes the instance number, where applicable, for the alert.
30800 2 692 RM Stop - Sensor
lost
Alarm/A Error occurs inside
of route monitoring
function.
If the error fre-
quently occurs,
contact FURUNO
and inform fre-
quency of occur-
rence.
30800 3 693 RM Stop - Internal
Error
Required data for
route monitoring
such as position,
SOG/COG cannot
be acquired.
Check the connec-
tion with GYRO,
GPS and SDME.
30801 - 485 Depth Limit Alarm/A Seabed has been
less than set depth
for more than 3 sec-
onds.
Be careful of risk of
grounding.
30802 - 495 Anchor Watch Warning/
A
While anchor watch
alert function is en-
abled, ship's posi-
tion has been
outside of alarm
area centering cer-
tain position for
more than 3 sec-
onds.
Be careful of drag-
ging anchor.
30803 - 640 Chartalign: Over
30 min
Caution/B Own ship position
has been offset for
more than 30 min-
utes.
Reset offset.
30807 - 820 NAVTEX Mes-
sage Received
Caution/B NAVTEX message
is received.
-
30850 - 652 End of track Warning/
A
Ship will reach last
waypoint in 30 sec-
onds.
Be careful that last
waypoint is ap-
proaching.
30855 - 695 Position Monitor Caution/B When position data
is input from two or
more GPS, there is
a difference be-
tween the position
data from each
GPS.
Check an accurate
position data
source, GPS re-
ception status and
GPS settings.
30860 1 645 Navigational Haz-
ard
Warning/
A
One or more navi-
gational hazard de-
tected by the Look-
ahead function.
Adjust course as
necessary.
ALF ALR
Alert name
Priority/
Category
Meaning Remedy
No. Inst.* No.

Table of Contents

Other manuals for Furuno FMD-3100

Related product manuals