Furuno FMD-3100 - How to Delete ENC, ARCS Licenses; How to Find ENC Chart Manufacturer Info

3. HOW TO MANAGE CHARTS
3-9
3.5 How to Delete ENC, ARCS Licenses
1. Get into the Chart maintenance mode.
2. Click the [License] button on the InstantAccess bar™.
3. Click the [ENC] or [ARCS] tab as appropriate to show a list of licenses.
4. Put a checkmark next to the license(s) to delete.
5. Click the [Delete Licenses] button to delete the license(s) selected.
3.6 How to Find ENC Chart Manufacturer Info
The ENC chart manufacturer information shows if your installed ENC charts are offi-
cial or unofficial. To find this information, use the [Producer Code] button in the [Li-
censes] dialog box. The following functions use this feature.
• [Filter] window (see section 3.16) can show or hide official or
unofficial charts.
• Chart judgment is shown for unofficial charts on the [Check Results] of the [Route
Plan] dialog box (see section 9.4.5) if the corresponding alert check is active.
1. In the Chart maintenance mode, click the [License] button to show the [Licenses]
dialog box.
2. Click the [ENC] tab.
3. Click the [Producer Code] button.
4. Select the ENC chart manufacturer information file then click the [Open] button.
5. Reset the power.
Official
Unofficial
Official: