3. HOW TO MANAGE CHARTS
3-19
3.15 How to Display Install/Update History
You can see a history of chart installations and updates. On the InstantAccess bar™,
click the [Log] and [Update Log] buttons followed by the [ENC], [ARCS] or [C-MAP]
button. The example below shows the install/update history for ENC charts.
You can filter the log with [Period Covered (UTC)]. Enter the period to display then
click the [Set Period] button. Click the [Clear Period] button to display all entries. The
[Refresh] button updates the list. [Print Text] prints hard copy of the history.
The [Find] button searches required text string as follows:
1) Click the [Find] button to show the [Find text] box.
2) Click the input box then enter the text to search.
3) Select the search direction with the up or down radio button.
4) Click the [Find] button. The first matching text is highlighted in yellow at the top of
the screen.
5) To continue the search click the [Find] button. To cancel the search, click the [Can-
cel] button.
Find
Input box
Enter text in box and
[Find] button appears.
To Next Page
Loading...
