2-36
MIF Command List
Command Description
DRS Keylock setting, getting highest priority. (DISTRESS)
DRR Releasing keylock, (DISTRESS)
FZS Keylock setting, Highest priority to 2182 KHz from main unit (FREEZE)
FZR Releasing keylock, (FREEZE)
EM* [*; 0: LSB, 1: J3E, 2: H3E, 5: TLX, 6: FAX]
FT******* TX freq. setting, *: 1234560 for 12,345.60 KHz, for example
FR******* RX freq. setting, *: 1234560 for 12,345.60 KHz, for example
ST**** Registeration of class of emission and TX/RX frequency onto user channel
CH**** User channel setting, *: band + channel
RC**** User channel setting (Recall)
CHI***** ITU Channel setting
RCI***** ITU channel setting (Recall)
AGS AGC on setting
AGR AGC off setting
RF** RF Gain setting, [*; FF: RF GAIN MAX to 00: RF GAIN MIN]
SQS Squelch on setting
SQR Squelch off setting
SCS start scanning
SCR stop scanning
PO* TX power setting, [*; 0, 1, 2: LOW, 3: HIGH]
TU TUNE OK; [*], TUNE ERROR; [?] Tuning,
IC*S Intercom calling, *: Call number
IC*R Intercom call termination, *: Call number
CAID Confirmation of model name, [#IDFS1503] responded
CAEM Confirmation of class of emission, [#EM*] responded
CAFT Confirmation of TX frequency, [#FT*******]
CAFR Confirmation of RX frequency, [#FR*******]
CACH Confirmation of channel setting, [#CH****], [#CHI*****] responded
CARC Confirmation of, [#RC****], [#RCI*****] responded
CAAG Confirmation of AGC setting, [#AGS (AGC ON)], [#AGR (AGC OFF)] responded
CARF Confirmation of RF gain setting, [#RF**] responded,*; 00 to FF
CASL Confirmation of S level, [#SL**] responded,*; 00 to FF
CASQ Confirmation of squelch setting, [#SQS (SQ ON), #SQR (SQ OFF)] responded
CAPO Confirmation of TX power, [#PO*] responded
To Next Page
Loading...
