Furuno FS-1570 - Alarm; Auto Ack; Erase; Message

3.3 DSC SETUP
3-15
Table 3.3.1 lists the DSC SETUP Menus.
Table 3.3.1 DSC Set up menus
Item Option
RCVD CALL ON OFF INTERNAL
AUDIO
ALARM
OLD
POSITION
ON OFF
POSITION OLDER 4.0, 3.0, 2.0, 1.0, 0.5H
1 ALARM
EXT ALARM
DITRS/
URG
ROUTINE
ALL OFF
COMPLY TYPE UNABLE ABLE
UNABLE REASON See note)
POSITION CALL ON OFF
2 AUTO ACK
POLLING CALL ON
OFF
RCVD ORDINARY LOG?
RCVD DISTRESS LOG?
TRANSMITTED LOG?
3 ERASE
SEND MESSAGE?
See page 3-18.
4 MESSAGE Message file entry See page 3-20.
INPUT TYPE AUTO
MANUAL
LAT
LON
5 POSITION
TIME
Valid when INPUT TYPE is MANUAL.
XMIT CALL AUTO
MANUAL
RCVD CALL AUTO
MANUAL
6 PRINT OUT
DAILY TEST AUTO
MANUAL
ROUTIINE F1-F6: OFF
7 SCAN FREQ.
DISTRESS 2,8M: FIXED 4,6,12,16M: ON
KEY CLICK ON OFF
HANDSET 32 (0-63)
ORDINARY ALARM 35 (0-63)
8 VOLUME
DISTRESS ALARM
38 (38-63)
9
TEST
(PASSWORD)
See page 6-15.
MMSI FIXED
LINE OUT +0.0 DB (-4.5 - +4.5dB 1.5dB step)
WATCH RCVR MF/HF MF
CH DET S LEVEL 100 (OFF – 255)
10
SYSTEM
(PASSWORD)
REGULATION
INTL RUSSIA
Note)
1) Factory-default is screened.
2) *: “UNABLE REASON” is selected among;
NO REASON GIVEN(default), BUSY, EQUIP DISABLE,
MODE NOT USABLE and CH NOT USABLE.