Furuno FS-2550 - 5. Jumper setting; 6. Changing ID (MMSI) number; 4. Jumper wire setting; DSC Terminal DSC-60

Content
4
Section B4. DSC-60
1. Connection ..................................................................................................... 1
2. System setup list ............................................................................................ 2
2.1 Setup menu: [#/SETUP] ................................................................... 2
2.2 System menu description................................................................. 4
3. Setting DIP Switches ...................................................................................... 6
3.1 Outline of the settings on CONTROL/MODEM board ...................... 6
3.2 Setting for the connection with FS-75/1562/5000 and DP-6............. 7
3.3 Setting for the connection with navigational aids.............................. 8
3.4 Setting for the connection with DMC, IC-302 and PC....................... 9
4. Setting the receiver board............................................................................. 10
5. How to enter MMSI....................................................................................... 11
6. Self test......................................................................................................... 12
7. Setup menu list............................................................................................. 13
8. Power and Frequency measurement of MF/HF Radiotelephone .................. 18
9. How to update system program.................................................................... 19
9.1 Over view....................................................................................... 19
9.2 Updating MAIN program with IB-581 ............................................. 20
9.3 Updating MODEM program with IB-581......................................... 21
C. MF/HF Watch Receiver
Section C1. AA-50
1. Over view........................................................................................................ 1
2. Connection ..................................................................................................... 2
3. Jumper setting................................................................................................ 2
4. Self test........................................................................................................... 3