6 PREPARING TX CALLS
6-10
Editing before sending
1. Press the [FILE/CURSOR] key at the DSC standby screen to show the send message
file list.
2. Rotate the [ENTER] knob to choose file desired and then push the [ENTER] knob.
DELETE
DETAIL
3. DETAIL is selected; push the [ENTER] knob. The message contents are shown on the
“Compose message” screen.
4. Edit the message as necessary.
5. Press the [CALL] key to send the message.
6.7 Deleting Send Message Files
1. Press the [FILE/CURSOR] key at the DSC standby screen to show the send message
file list.
2. Rotate the [ENTER] knob to choose file desired and then push the [ENTER] knob.
DELETE
DETAIL
3. Rotate the [ENTER] knob to choose DELETE and then push the [ENTER] knob.
6.8 Printing List of Send Message Files
You can print a list of send message files as follows:
1. Press the [FILE/CURSOR] key to open the Send message file list.
2. Press the [8/PRINT] key.
3. YES is selected; push the [ENTER] knob to print.
********** Send message file **********
001. FURUNO JAPAN INDIVIDUAL CALL
002. FURUNO USA INDIVIDUAL CALL
003. FURUNO UK PSTN CALL
004. FURUNO DENMARK GROUP CALL
005. FURUNO NORWAY INDIVIDUAL CALL
006. FURUNO SPAIN ALL SHIPS CALL
007. FURUNO FRANCE INDIVIDUAL CALL
Note: Message not framed in actual printout.
To Next Page
Loading...
