Furuno FS-2570 - Page 78

5 CALLING, RECEIVING
5-16
GO TO ALL VIEW
CALL TYPE
PRIORITY
COM. TYPE
COM. FREQ
DSC FREQ
: GROUP CALL
: ROUTINE
: TELEPHONE
: NO INFO
: 2M-INTL
GROUP ID 000000000
**
Compose message
**
4. Key in group ID (nine digits) with the numeric keys and then push the [ENTER] knob.
5. Push the [ENTER] knob to open the PRIORITY menu.
GO TO ALL VIEW
CALL TYPE
GROUP ID
COM. TYPE
COM. FREQ NO INFO
DSC FREQ
: GROUP CALL
: 012345678
: 2M-INTL
PRIORITY
SAFETY
URGENCY
ROUTINE
**
Compose message
**
6. Rotate the [ENTER] knob to choose priority desired and then push the [ENTER] knob.
7. Push the [ENTER] knob to open the COM. TYPE menu.
GO TO ALL VIEW
CALL TYPE
GROUP ID
PRIORITY
COM. FREQ
DSC FREQ
: GROUP CALL
: 012345678
: Routine
: Telephone
: No infor
: 2M-INTL
NBDP-FEC
SPECIAL
6
TELEPHONE
COM. TYPE
TTY RCV
TTY
MORSE KEY
MORSE TAPE
FACSIMILE
5 MAIN
For Routine
Rotate the [ENTER]
knob to scroll.
TELEPHONE
NBDP-FEC
For Safety or Urgency
**
Compose message
**
8. Rotate the [ENTER] knob to choose communication type desired and then push the
[ENTER] knob.
Note: If you have previously registered user channels (Chapter 2), you can insert desired
channel into your message as follows:
1. Press the [FILE/CURSOR] key after completing step 8.
2. Rotate the [ENTER] knob to choose file and then push the [ENTER] knob.
3. Push the [ENTER] knob again to insert channel no. in your message.
4. Go to step 11.
9. Push the [ENTER] knob to open the COM. FREQ menu.
CALL TYPE : GROUP
COM. FREQ :
2164.0 kHz
COM. TYPE : TELEPHONE
PRIORITY : ROUTINE
GROUP ID :
012345678
DSC FREQ : 2M-INTL
GO TO ALL VIEW
FREQUENCY
CHANNEL
NO INFO
GO TO ALL VIEW
**
Compose message
**