1. HOW TO INSTALL THE SYSTEM
1-9
1.6.3 Printer Interface IF-8500
Refer to the outline drawing at the end of this manual for mounting dimensions and
recommended maintenance space. Follow the compass safety distance shown in the
Safety Instructions to prevent interference to a magnetic compass. Fasten the Printer
Interface with self-tapping screws (local supply) to desktop or bulkhead.
1.6.4 External Loudspeaker SEM-21Q
The external loudspeaker can be installed on a tabletop, the overhead or bulkhead.
Follow the compass safety distance shown in the Safety Instructions to prevent inter-
ference to a magnetic compass. See the outline drawing at the back of this manual for
mounting dimensions and recommended maintenance space. When selecting the lo-
cation, keep in mind the length of the connection cable (2.8 m). Fasten the loudspeak-
er to the mounting location with the self-tapping screws (supplied).
1.6.5 AC-DC Power Supply PR-850A, PR-300
Select a location that satisfies the following conditions:
• The location provides good ventilation.
• The location is clean and dry.
• Make sure the location is strong enough to support the unit under the conditions of
continued vibration and shock normally encountered on the boat.
• Follow the compass safety distance in the Safety Instructions to prevent interfer-
ence to a magnetic compass.
• The location provides the maintenance space shown in the outline drawing.
To Next Page
Loading...
