Furuno FS-2575 - Example Antenna Configurations; Separate Antennas Configurations

3. INITIAL SETTINGS
3-6
3.4.6 Example antenna configurations
Separate Antennas Configurations
Separate antennas configuration 1: Separate R_ANT and WR1 antennas
1) Set [RX ANT] on the [RT SETUP] menu to [CONNECT].
2) Set [ANT SELECT] on the [RT SETUP] menu to [RX ANT] or [TRX ANT].
3) Turn off [DIVIDER] in the [RT SETUP] menu of the [SERVICE] menu.
Separate antennas configuration 2: Separate R_ANT and WR1 antennas, option-
al WR2 board installed
1) Set [RX ANT] on the [RT SETUP] menu to [CONNECT].
2) Set [ANT SELECT] on the [RT SETUP] menu to [RX ANT] or [TRX ANT].
3) Turn off [DIVIDER] in the [RT SETUP] menu of the [SERVICE] menu.
R_ANT T/R_ANT
T/R_ANT
J8
R_ANT
WR1_ANT
J7
J6
J5
J4
J3
J1
J2
J3
J2
J2
WR1_ANT
AT-5075/
AT-1575
T/R ANTRANT
WR1 ANT
WR2 ANT
J2
J2
J2
J7
J5
J6
J3
J4
J1
J2
J3
AT-5075/
AT-1575