3. INITIAL SETTINGS
3-8
Full duplex configurations (FS-5075 only)
Full duplex configuration 1: Separate R_ANT and WR1 antennas, optional DUP-
FIL board installed
Watch on DSC general frequencies available with installation of optional WR2 Board.
1) Set [RX ANT] on the [RT SETUP] menu to [CONNECT].
2) Set [ANT SELECT] on the [RT SETUP] menu to [RX ANT].
3) Turn off [DIVIDER] in the [RT SETUP] menu of the [SERVICE] menu.
R_ANT T/R_ANT
T/R_ANT
WR1_ANT
J8
WR2_ANT
R_ANT
WR1_ANT
WR2_ANT
J7
J6
J5
J4
J3
J1
J2
J3
J3
J1
J2
J2
J2
J2
To Next Page
Loading...
