1. HOW TO INSTALL THE SYSTEM
1-10
1.6.6 Terminal Unit IB-585
Install the Terminal Unit on a desktop. Select a location that meets the following con-
ditions.
• The temperature and humidity in the location must be stable and moderate.
• Keep the unit away from the high-power radiotelephone and its feeder wire so that
RFI (Radio Frequency Interference) is minimum.
• Follow the compass safety distance shown in the Safety Instructions to prevent the
interference to a magnetic compass.
• Follow the recommended maintenance space shown in the outline drawing to facil-
itate maintenance and checking.
How to install the terminal unit
1. Fix the bracket to the location with four self-tapping screws (supplied).
2. Loosely screw in two knobs in the terminal unit.
3. Set the terminal unit to the bracket and tighten the knobs.
How to install the keyboard
1. Attach the function key label to the keyboard as shown below.
2. Attach four fasteners (small, supplied with the optional kit) to the bottom of the
keyboard.
3. Attach four fasteners (large, supplied with the optional kit) to the small fasteners
used in step 2.
4. Remove the paper from four fasteners.
5. Fasten the keyboard to the location.
Function key label (supplied)
Keyboard for IB-585
or
To Next Page
Loading...
