Furuno FS-5075 - DSC SETUP Menu; RT SETUP Menu

3. INITIAL SETTINGS
3-3
3.4.3 DSC SETUP menu
The [DSC SETUP] menu sets up the system’s DSC features.
MMSI: Ship’s MMSI (display only).
CLASS: Set the function of the watch receiver: [MF/HF] (sea area A3), [MF] (sea area
A1, A2), or [NON-GMDSS] (DSC function disabled).
3.4.4 RT SETUP menu
SETUP
The [RT SETUP] menu sets functions according to needs and regulations and adjusts
TX power.
CW: Enable or disable CW. [ENABLE]: On, [DISABLE]: Off
SELCALL: Enable or disable the selective call radio buoy feature. When enabled,
function key F3 is automatically assigned to the selective call buoy feature. [ENABLE]:
On, [DISABLE]: Off
REF OSC: Tune the reference oscillator.
RX ANT: Select whether an RX antenna is connected or not. [CONNECT]: RX anten-
na connected. [DISCONNECT]: RX antenna not connected
DIVIDER: Divider connection. [ON]: Divider connected. [OFF]: Divider not connected.