3-1
3. POST INSTALLATION SETTINGS
3.1 How to Set the Language
This equipment is shipped with English set as the default language. To change the
language in which the menus are displayed, follow the procedure below.
The following languages are supported:
Note: “Select” means move the cursor, using the trackball. Then, when highlighting a
menu option, click the left button on the trackball to select the highlighted item.
1. Turn the power to the equipment on. After the startup procedure is complete, the
menu is available.
2. Press the MENU/ESC key to open the menu. The main menu window will be
displayed.
3. Select [Others] to display the [Others] menu.
4. Select [Initial Setting] to display the [Initial Setting] menu.
English Russian
Japanese Chinese
French Korean
Spanish Turkish
Quit
Menu
TX/RX Setting...
Gain Setting...
Display Setting...
Picture Setting...
Others...
䇭䇭
Shortcut Menu
Others
Erase Mark...
Record/Recall...
Wheel Setting...
Mid Key Setting... : Fixed Position
Display Setting...
Alarm & Audio...
Register...
Initial Setting...
Quit
To Next Page
Loading...
