6-4
Removing waypoints from routes
Removing route waypoints through the
route list
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Press ▲ or ▼ to select the route desired.
3. Press the EDIT ROUTE soft key and then
LOCAL LIST soft keys to show the
waypoint list.
4. Press ▲ or ▼ to select the waypoint you
want to delete.
5. Press the REMOVE WPT soft key.
Removing route waypoints from the plotter
display
1. Press the [WPT/RTE] key followed by the
ROUTES soft key to open the ROUTE
menu.
2. Press ▲ or ▼ to select the route desired.
3. Press the EDIT ROUTE soft key.
4. Press the PLOT soft key to show the plot
screen.
5. Operate the cursor pad to place the cursor
on the waypoint you want to remove from
the route.
6. Press the REMOVE WPT soft key.
6.4 Creating Track-based
Routes
You can create routes based on your ship’s
track by entering waypoints at own ship’s
position. This feature is useful when you wish
to retrace a track.
1. Press the [WPT/RTE] key to open the WPT
& ROUTE menu.
2. Press the CREATE VOYAGE BASED
ROUTE soft key to show the SAVE ROUTE
menu.
GPS 3D
SAVE
ROUTE
ABCDEFGHIJKL
FISH01
NEW
SELECT
ROUTE
LENGTH
25.6 nm
HPT001
12:30 29MAY02
ABCDEF
15:21 01MAY02
BRIDGE
16:45 01MAY02
WAYPOINTS
35
LENGTH
56.7 nm
WAYPOINTS
6
LENGTH
21.1 nm
WAYPOINTS
3
LENGTH
4.7 nm
WAYPOINTS
1
RETURN
RETURN
SEARCH FOR _ _ _
Save route menu
3. Press the NEW soft key to show the new
route number.
GPS 3D
SAVE
ROUTE
CANCEL
START
LOG
ROUTE NAME
0 0 6
COMMENT
Next consecutive route number
Save route menu for new route
4. If required, you may change the route
name and enter a comment, using the
cursor pad and alphanumeric keys.
To Next Page
Loading...
