Furuno GP-1650W - 7. NAVIGATION; 7.5 Canceling Navigation

7. NAVIGATION
7-6
To select waypoint switching method do the
following:
1. Press the [MENU] key.
2. Press the DISPLAY OPTIONS soft key.
3. Select WAYPOINTS SW.
4. Press the EDIT soft key to show the
waypoint sw window.
WAYPOINTS SW
AUTO 1
AUTO 2
MANUAL
Waypoint sw window
5. Select appropriate waypoint switching
method.
6. Press the ENTER soft key to close the
window.
7.5 Canceling Navigation
1. Press the [WPT/RTE] key.
2. Press the LOG soft key.
3. Press the STOP soft key.
4. Press the [ENTER] key to go stand by.
5. Press the RELEASE soft key.
6. Press the [ENTER] key.