4. ROUTES
4-2
4.2.2 How to create a route from the Routes List
A route can also be created from the [Routes List], with the points you have entered.
1. Open the [PLOTTER] menu and select [ROUTES] to show the [Routes List].
2. The [New] button is selected; push the RotoKey
TM
.
3. The input box (at the bottom of the screen) is showing the route name, the young-
est empty route number. Change the route name if necessary. Finally, long-push
the RotoKey
TM
. The screen something like the one shown below appears.
4. Press the ENT key to show the context-sensitive menu then do the following to
enter a route point.
1) [INSERT] is selected; press the ENT key. The cursor moves to the saved
points column.
2) Use the CursorPad to select a point then press the ENT key. The cursor re-
turns to the route points column.
3) Use the CursorPad to put the cursor on the next route point number then
press the ENT key.
4) Repeat 1) - 3) to continue entering points.
Saved
points
Route
points
LEG
To Next Page
Loading...
