EasyManua.ls Logo

Furuno GP-170 - 1. Operational Overview; 1.1 Control Panel and Key Functions

Furuno GP-170
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. MOUNTING
1-3
1.2 Antenna Unit
1.2.1 Mounting
Install the antenna unit referring to the "INSTALLATION PROCEDURE" at end of
manual. When selecting a mounting location for the antenna unit, keep in mind the fol-
lowing points.
Select a location out of the radar and inmarsat beams. Those beams will obstruct
or prevent reception of the GPS satellite signal.
The location should be well away from a VHF/UHF antenna. A GPS receiver is in-
terfered by a harmonic wave of a VHF/UHF antenna.
The should be no interfering object within the line-of-sight to the satellites. An object
within line-of-sight to satellites, for example, a mast, may block reception or prolong
acquisition time.
Mount the antenna unit as high as possible to keep it free from interfering objects
and water spray. Freezing water can interrupt reception of the GPS satellite signal.

Table of Contents

Other manuals for Furuno GP-170

Related product manuals