3. ADJUSTMENTS
3-12
Input sentence of Furuno proprietary sentence
Others
*: not used on SOLAS ships.
**: for IEC61162-2 high speed transmission.
Note 1: BWC, BWR, GGA, GLL, RMB, RMC or WPL is required to output DTM.
Note 2: The settings and registered data can be saved to or loaded from a USB flash
memory. For details, refer to the Operator’s Manual. You can edit the settings and reg-
istered data with a text editor on your PC.
Sentence Description
$PFEC, AGFPA Autopilot information from FURUNO autopilot equipment
$PFEC, GPatt Pitch and roll
$PFEC, GPhve Heaving
$PFEC, IIals Contact signal
$PFEC, pireq Product information
Sentence Description
RTCM sc104 Data for DGPS
GPX Data for waypoint, route and track
Port Input Output
DATA1 RTCM sc104 or the following sen-
tence selected by menu
IEC 61162-1 Ed.3/4 and NMEA 0183
Ver. 1.5/2.0
ACK, ACN, CRQ, DBT, DPT, HBT,
HDG, HDM*, HDT*, MSK, MSS,
MTW, THS, TLL, VBW, VHW,
$PFEC, AGFPA, $PFEC, GPatt,
$PFEC, GPhve, $PFEC, IIals,
$PFEC, pireq
RTCM sc104 or the following sen-
tence selected by menu
IEC 61162-1 Ed.3/4 and NMEA 0183
Ver. 1.5/2.0
AAM, ALC, ALF, ALR, APA*, APB,
ARC, BOD, BWC, BWR, BWW, DTM,
GBS, GGA, GLL, GNS, GRS, GSA,
GST, GSV, HBT, MSK, MSS, POS,
RMB, RMC, Rnn*, RTE, VDR, VTG,
WCV, WNC, WNR, WPL, XTE, ZDA,
$PFEC, IIalr, $PFEC, pidat, $PFEC,
GPals, $PFEC, GPxfr
DATA2
DATA3 External MOB
DATA4** RTCM sc104 or the following sen-
tence selected by menu
IEC 61162-1 Ed.3/4 and NMEA 0183
Ver. 1.5/2.0
ACK, ACN, CRQ, DBT, DPT, HBT,
HDG, HDM*, HDT*, MSK, MSS,
MTW, THS, TLL, VBW, VHW,
$PFEC, AGFPA, $PFEC, GPatt,
$PFEC, GPhve, $PFEC, IIals,
$PFEC, pireq
Ethernet RTCM sc104 or the following sen-
tence selected by menu
IEC 61162-1 Ed.3/4 and NMEA 0183
Ver. 1.5/2.0
ACK, ACN, DBT, DPT, HBT, HDG,
HDM*, HDT*, MTW, THS, TLL,
VBW, VHW, $PFEC, AGFPA,
$PFEC, GPatt, $PFEC, GPhve,
$PFEC, IIals, $PFEC, pireq
RTCM sc104 or the following sen-
tence selected by menu
IEC 61162-1 Ed.3/4 and NMEA 0183
Ver. 1.5/2.0
AAM, ALC, ALF, ALR, APB, ARC,
BOD, BWC, BWR, BWW, DTM,
GBS, GGA, GLL, GNS, GRS, GSA,
GST, GSV, HBT, POS, RMB, RMC,
RTE, VDR, VTG, WCV, WNC, WPL,
XTE, ZDA, $PFEC, IIalr, $PFEC, pi-
dat, $PFEC, GPals, $PFEC, GPxfr
USB GPX GPX