Furuno GP-25 - Page 102

APPENDIX 1 MENU TREE
AP-2
Visual Alarm
Arrival Alarm (
Off
, 0.01 to 5.39 nm;
0.10 nm
)
XTE Alarm (
Off
, 0.01 to 5.39 nm;
0.10 nm
)
Shear Alarm (
Off
, 0.00 to 35.99°F,
0.00
°F)
Depth Alarm (
Off
, Within, Outside; MAX, MIN 0000.0 to 9999.9 ft;
MAX: 10000.0 ft, MIN: 0000.0 ft)
Anchor Alarm (
Off
, 0.00 to 5.39 nm,
0.10 nm
)
Trip Alarm (
Off
, 1 to 5399 nm,
4860 nm
)
Speed Alarm (
Off
, Within, Outside; MAX, MIN 00.0 to 539.9 kn,
000.0 nm
)
(Con’t from previous page)
Interface
Select Output (
REM1
, REM2, AP, GPS)
Select Version (
2.0
, 3.0)
GPS Calibration
(
Off
, On)
Position Calibration by Cursor
Position Calibration by Value
Position Filter
(
Off
, On)
Coordinate System
(ddd mm.mmm,
ddd mm.mmmm
, ddd mm ss)
Rotation Threshold
GPS Position
Navigation Setup
Factory Default
Clear Memory
Default Setttings
Update Plotter Software
Update Worldwide Maps
System Update
Test
Touch screen Calibration
Bearings
(
True
, Mag)
Variation
(
Auto,
0 to 99.9 E/W; 00.0 E)
Compass
Restart GPS
Internal Antenna
(
Off, On
)
WAAS Search (
Auto
, Manual 120 to 138;
Manual 134
)
SV SLV (05 to 90;
05°
)
Initial GPS Setup
Simulation Mode
(
Off
, On)
Course
(
000 to 359; 000°T
)
Speed (
000.0 to 539.9; 000.0 kn
)
Date
Time
GPS Simulation
Display Test
Memory Test
SD Card Test
General
Key Beep (Off, On)
Time Offset (UTC, -19:30 to +19:30; +00:00)
Daylight Saving Time (Off, On)
Time Format (12 hour, 24 hour)
Date Format (MM-DD-YY, DD-MM-YY)
Data Box Number (Off, 2 Small, 2 Large, 4 Small)
Memory Card