4. ROUTES
4-7
4.6 How to Display a Route
To display a route
1. Display [Routes List].
2. Long tap a route from the list to show the pop-up menu.
3. Tap [Plot]. The route is displayed on the plotter display. The range scale is auto-
matically adjusted to display the entire route. A line runs through route points. The
line shows the shortest path to the destination.
To delete the line through route points
1. Open [Menu] and tap [Routes].
2. Tap [Delete Plot]. The line is deleted.
4.7 How to Connect Two Routes
You can connect two routes from [Routes List].
1. Display [Routes List].
2. Long tap the starting route from the list to show the pop-up menu.
3. Tap [Edit] to show the [Route Edit] screen.
4. Tap the left list to show the pop-up menu and tap [Connect].
The routes are displayed on the right list.
5. Tap the route to connect. Route points of the selected route are added under the
last point of the 1st point.
6. Repeat step 5. If the total number of points exceeds 50, the surplus is removed
from the end of the route.
7. Tap [Exit] (at the bottom of the screen) to close the screen.
To Next Page
Loading...
