7. VISUAL ALARMS
7-2
7.2 Arrival Alarm
The arrival alarm informs you that your boat is approaching a destination waypoint.
The area that defines an arrival zone is that of an imaginary circle which you approach
from outside the circle. The alarm will be released if your boat enters the imaginary
circle. You must set a destination to use this alarm.
To set the arrival alarm:
1. Open [Home] and tap the [Visual Alarm] menu icon.
2. Tap [Arrival Alarm].
3. Tap [On] or [Off] to activate or deactivate the alarm. To change the alarm value,
go to step 4.
4. Tap the numeric value to show the Numeric Keypad and set the alarm value (set-
ting range: 0.00 to 5.39 nm).
5. Tap outside the menu screen to close the menu.
6. Tap [Exit] to close [Home].
: Alarm area
Own ship
Alarm range
Destination waypoint
To Next Page
Loading...
