10. RECORDING & PLAYING BACK DATA
10-2
10.2 Memory Card Operation
10.2.1 Formatting the memory card
Before you can use a memory card, it must be formatted. Formatting prepares
the card for use with the system. To format a card, do the following procedure.
Note: Formatting a memory card erases all data from the card.
1. Open the slot cover at the front of the display unit.
2. Insert a blank memory card in to the left-hand card slot, with groove side up.
3. Close the slot cover.
4. Press the [MENU] key to show the main menu.
5. Press the [3] key to show the MEMORY CARD OPERATION & DATA
TRANSFER menu.
3. MEMORY CARD OPERATIONS & DATA TRANSFER
1. SAVE DATA TO MEMORY CARD
2. PLAYBACK DATA FROM MEMORY CARD
3. DISPLAY DATA FROM MEMORY CARD
4. DELETE FILE IN MEMORY CARD
5. FORMAT MEMORY CARD
6. AUTO BACKUP
7. DISPLAY DATA FROM INTERNAL MEMORY
8. OPERATE INTERNAL MEMORY
9. DATA TRANSFER
TURN KNOB TO SELECT MENU AND PRESS KNOB TO ENTER.
OR PRESS APPROPRIATE NUMERIC KEY TO SELECT MENU.
Memory card operation & data transfer menu
6. Press the [5] key to show the FORMAT MEMORY CARD menu.
To Next Page
Loading...
