3. SETTINGS
3-2
5. Select [2 Wind Speed].
6. Select [1 True], [2 Theoretical] or [3 Relative].
[True]: The wind speed and angle minus movement of
ship, reference to North.
[Theoretical]: The wind speed and angle minus move-
ment of ship, reference to ship’s bow.
[Relative]: The speed and relative direction that the wind appears to blow with ship
in motion, reference to ship’s bow.
7. Press the MENU ESC key to close the main menu.
3.1.3 How to use the "cm/sec" display
You can change the unit for the own ship’s speed to "cm/sec" from the unit set in
paragraph 8.3.3.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [1 System].
3. Select [2 cm/sec Display].
4. Select [2 On] to use "cm/sec".
5. Press the MENU ESC key to close the main menu.
You can also toggle between [cm/sec] and [Preset Unit] (see section 8.3.3) by
pressing and holding the 1 key.
To Next Page
Loading...