3. SETTINGS
3-16
3.8.5 How to set the digit number for sentences
Set the number of figures to show after the decimal point for heading, speed (VTG,
VBW), and roll, pitch.
1. Press the MENU ESC key to open the main menu.
2. Select [5 I/O] then
[8 Number of digits
after decimal point].
3. Select [1 VTG], [2 VBW], [3 HDG] or [4 Roll, Pitch].
4. Select [1 1] or [2 2].
[1]: Displays the sentence data to the first decimal place.
[2]: Displays the sentence data to the second decimal place.
Note 1: When changing the setting for [3 HDG], the setting is re-
flected to the ROT indication.
Note 2: When changing the setting for [4 Roll, Pitch], the setting is reflected to the
HEAVE indication.
5. Press the MENU ESC key to close the main menu.
3.9 How to Clear the Memory
You can clear display setting or GNSS memory to start afresh, or restore the default
settings.
1. Press the MENU ESC key to open the main menu.
2. Select [7 System Setting] then [9 Clear
Memory].
3. Select [1 Clear Display Setting], [2 Clear
GNSS] or [3 Clear All].
[Clear Display Setting]: Clears the dis-
play setting.
[Clear GNSS]: Clears the GNSS memo-
ry.
[Clear All]: Clears both display setting
and GNSS memory.
For [Clear All], the window for password
appears. Enter the password (four char-
acters) with the numeric keys. The con-
firmation message appears.
4. Select [1 Yes]. The message "Processing... " appears. After the memory clear, the
application automatically restarts.
To Next Page
Loading...