Furuno LH-5000 - Page 11

LH-5000 Operator’s Manual
Installation
6
1
Hanger
3
Loud hailer
2
Tapping screw(PA4.0 x 25)
4
Hanger knob
For flush mounting
Step 1 Determine the position of installation holes according to the marking
template and drill the hole.
Step 2 Pry off the frame from the front panel.
Step 3 Paste the cushion on the back of the front panel with the double-side
tape on the cushion.
Step 4 Connect the intercom speaker to the loud hailer using the color-coded
signal cable.
Signal Cable
Power Cord
1
2
3
4