Furuno LH-5000 - Installing the Intercom Speaker (Optional)

LH-5000 Operator’s Manual
Installation
9
1.3 Installing the Intercom Speaker
(Optional)
For desktop mounting
Step 1 Put the hanger in a location where it is easy to install the intercom
speaker.
Step 2 Fix the hanger with four screws.
Step 3 Set the intercom speaker to the hanger.
Step 4 Tighten the knob bolts on both sides of the hanger.
Step 5 Connect the signal cable.
1
Hanger
3
Intercom speaker
2
Tapping screw (PA4.0 x 25)
4
Hanger knob
2
1
4
3
Signal Cable