LH-5000 Operator’s Manual
Step 4 After completing your conversation, press the ALL key to return to
the home screen, or press the same selected key (IC1-IC6) to back to
previous mode.
Manually receiving a call from a single station
Step 1 Press the selected key (IC1–IC6) and hold the PTT key on the
microphone to answer the call.
Only in ALL mode, you can perform this function.
Step 2 Release the PTT key on the microphone to receive.
Step 3 After completing your conversation, press the ALL key to return to
the home screen, or press the same selected key (IC1-IC6) to back to
previous mode.
2.10 Hailing by Voice
Step 1 Press AFT, FWD, or BOTH key to select the horn speaker(s).
For example, if you press the FWD key, this key lights red and the
following information appears on the screen.
Step 2 Press and hold the PTT key on the microphone and speak into the
microphone.
To Next Page
Loading...
