Furuno LH-5000 - Renaming the Intercom Station; Selecting the Speaker

LH-5000 Operator’s Manual
Operation Overview
37
 OFF: You do not hear the beep when pressing the key on the front
panel.
2.16 Renaming the Intercom Station
Step 1 Press the MENU key on the front panel.
Step 2 Press the Up or Down key to select "RENAME IC" and press the
ENT key.
Step 3 Press the Up or Down key to select the intercom station to be
modified and press the ENT key.
Step 4 Press the Up or Down key to toggle the character at cursor position,
i.e. letters, numbers, hyphen, or space, and then press the ENT key to
confirm your selection.
Step 5 Press the ENT key to move the cursor position to the right and repeat
Step 4 to change each character.
Step 6 Press the MENU key to finish.
You can press any key from IC 1 to IC 6 to view the modification.
2.17 Selecting the Speaker
Step 1 Press the MENU key on the front panel.