Furuno MFD12 - How to Control Charts; How to View Your Charts

13. How to Adjust Settings
13-23
13.7 How to Control Charts
This section shows you how to control your chart catalog, from the [Chart-Data Cata-
log] menu. From this menu you can see, update, add and delete charts.
13.7.1 How to View Your Charts
1. Press the MENU key to open the menu.
2. Open the [Chart-Data Catalog] menu.
3. Rotate the RotoKey until a blue rectangle is about the chart list as shown below.
4. Push the RotoKey.
5. Rotate the RotoKey to select a chart. A preview of the chart appears at the upper
1/4 of the screen.
6. Press the MENU key to close the menu.
Preview of chart selected
from chart list.
Chart list
*
1
*
2
*
3
*
1
Navnet ID
*
2, 3
One (chart) memory slot=2 GB. A total of 24 GB in the hard drive is allotted
for charts.