11
NETWORK 1 to 4
The DIP switch inside the processor unit functions to enable/disable the network ports. The num-
ber on each DIP switch corresponds to port number. Turn DIP switch #1 (or #2) ON when the LAN
cable for DCU12/MCU-001 is connected to network #1 (or #2).
Note 1: When connecting PC(s) or FAR-2xx7 series radar, confirm that the DIP switch(es) corre-
sponding to the PC port(s) are turned OFF.
Note 2: The MCU-001(s) should be connected to the NETWORK 1 and/or 2 port(s) directly, not
via the HUB-101.
DIP switch
ON
OFF
Front
1 2 3 4
NETWORK
1 2 3 4
ONLY
MCU-001
DCU12
Binding screw
M4x8, 6 pcs.
To Next Page
Loading...
