Furuno NAVnet 1722 - Receiving Data Via Network Equipment

6. DATA TRANSFER
6-9
6.4 Receiving Data Via Network Equipment
You can receive waypoints, routes, marks and lines from NavNet equipment.
1. Press the [MENU] key.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the DATA TRANSFER soft key.
4. Press the RECEIVE DATA VIA NETWORK soft key.
HOST NAME
PLOT - - - -
MARKS & LINES
OFF
WAYPOINTS & ROUTES
OFF
RECEIVE
DATA
EDIT
RCV
RETURN
Receive data menu
5. Select HOST NAME and press the EDIT soft key.
HOST NAME
PROT----
Host name window
6. Use the cursor pad and the alphanumeric keys to input host name then push
the [ENTER] knob.
7. Select the data you wish to receive and press the EDIT soft key. For example,
select MARKS & LINES.
MARKS & LINES
▲
▼
¡
¤
ON
OFF
Marks & lines window
8. Select ON or OFF as appropriate and press the ENTER soft key.
9. Turn WAYPOINTS & ROUTES on or off as appropriate.