4. POINTS, BOUNDARIES
4-8
7. Tap [Icons Set] to select the icons set to use.
8. Select [Modern] or [Classic], referring to the figure below.
9. Tap the close button on the title bar to finish.
4.5.2 Default event mark settings
1. Open the home screen, then tap [Settings]→[Points & Boundaries].
2. Tap [Default Event Mark 1 Symbol].
3. Tap required symbol, then tap [<] to return one layer in the menu.
4. Tap [Default Event Mark 1 Color] to show the color options for points.
5. Tap required color, then tap [<] to return one layer in the menu.
6. Process Event Mark 2 - 6 similar to how you processed Event Mark 1.
7. Tap the close button to close the menu.
Note: If you do not require event marks 2 - 6, turn on [Record Event1 Automatically]
in the [Points] menu. In this case, the pop-up menu does not appear when you register
an event mark. See section 4.2.2.
[Modern] point [Classic] point
To Next Page
Loading...
