9. FILE OPERATIONS
9-3
9.3 How to Import User Objects
You can import points, routes and boundary lines to the internal memory of this unit,
using a SD card, microSD card or USB flash memory.
1. Put media in media in port (slot).
2. Open the Home screen, then tap →[Files]→[Import User Objects]. A list of files
stored on the inserted media appears.
3. Tap the file(s) to import. You are asked if you are sure to import the selected items.
4. Tap the [OK] button. The message "IMPORT SUCCEEDED" appears if the im-
porting was successful.
5. Tap the [OK] button.
6. Tap the close button on the title bar to finish.
9.4 How to Export, Import Track
How to export track
This unit saves up to 30,000 points of track data. If [Automatic Track Deleting] is OFF,
new track points are not saved when the capacity for track points is reached. You can
export all tracks to a SD card, microSD card, or USB flash memory.
1. Put formatted media in port (slot).
2. Open the home screen, then tap [Settings]→[Files]→[Export Tracks]. A list of files
stored on the SD card or USB flash memory appears.
3. Tap the destination where to export track.
4. Tap a tracks file. You are asked if you are sure to export tracks.
5. Tap the [OK] button. The message "EXPORT SUCCEEDED" appears if the ex-
porting was successful.
6. Tap the [OK] button.
7. Tap the close button on the title bar to finish.
USB 1
XXXX. XXX.tzx
XXXX. XXX.tzx
XXXX. XXX.tzx
XXXX. XXX.tzx
To Next Page
Loading...
