Furuno NAVNET TZ2 TZTL12F - How to Switch between Displays; How to Select the Data to Display in a Data Box

12. INSTRUMENT-RELATED DISPLAYS
12-30
12.7.3 How to switch between displays
There are two methods by which you can switch displays.
Tap screen: Tap the screen to show the pop-up window, then tap the indication in the
window, as in the example below.
Swipe screen: Swipe the screen from bottom up or top down.
12.7.4 How to select the data to display in a data box
Tap a data box in a Yamaha engine display, and a pop-up menu appears. Tap the de-
sired data on the pop-up menu to show it in the selected data box. The example below
shows the pop-up menu available with the boat status display.
For the engine combo display, only the data boxes in the top and lower sections can
be changed.
Pop-up window
Pop-up
menu
(example)
Pop-up
menu
(example)